Cleaning; Replacement Parts And Accessories; Specifications - Masterflex L/S 07575-00 Betriebsanleitung

CLEANING

Keep the drive enclosure clean with mild detergents. Do not immerse.
REPLACEMENT PARTS & ACCESSORIES
Description
Fuse—T3.15A 5 x 20 mm
Hand-held remote control
Replacement Seal Kit
Replacement Gear and Shaft Kit

SPECIFICATIONS

Output:
Speed:
Torque output, Maximum:
Continuous
Start-up
Speed regulation:
Line
Load
Drift
Display:
Remote outputs:
Input:
Supply voltage limits:
Current, max.:
Remote Inputs:
Construction:
Dimensions (L x W x H):
Weight:
Enclosure Rating:
Environment:
Temperature, Operating:
Temperature, Storage:
Humidity (non-condensing):
Altitude:
Pollution Degree:
Chemical Resistance:
Compliance:
Part Number
77500-25
07592-83
07575-01
07575-02
1 to 600 rpm
180 oz-in (13 kg•cm)
540 oz-in (39 kg•cm)
±0.25% F.S.
±0.25% F.S.
±0.25% F.S.
Five-digit, seven-segment LED
Voltage speed output (0–10V DC @ 1 kΩ min)
Current speed output (0–20 mA or 4–20 mA @ 0–600 Ω)
Tach output (TTL, 10 to 6000 Hz, 50% duty cycle 10 Hz/rpm)
Motor running output
(N.O. & N.C. contact closure, 1A @ 28V AC/DC)
Dual voltage—Automatically selected
90 to 130 Vrms @ 50/60 Hz, or 200 to 260 Vrms @ 50/60 Hz
2.2A @ 115 Vrms, or 1.1A @ 230 Vrms
START/STOP, CW/CCW, PRIME (Contact closure)
Voltage input (0–10V DC @ 10 kΩ)
Current input (0–20 mA or 4–20 mA @ 250 Ω)
14.0" x 9" x 9.3" (35 cm x 23 cm x 24 cm)
22 lb (10 kg)
IP 66 per IEC 60529/NEMA 4 X - indoor use
0° to 40°C (32° to 104°F)
–25° to 65°C (–13° to 149°F)
10% to 100%
Less than 2000 m
Pollution Degree 3
(Indoor use—sheltered locations)
Enclosure is 316 stainless steel
UL508C, CSA C22.2, No. 14
(For CE Mark):
EN61010-1 (EU Low Voltage Directive) and
EN61326-1 (EU EMC Directive
Description
Footswitch
Remote control cable,
25 ft (7.62 m)
Part Number
07595-43
77300-32
11