Labelling / Safety Marks - WIKA S-11 Betriebsanleitung

2. Safety

2.4 Labelling / safety marks

Product label
GB
Measuring range
Output signal
Power supply
S# Serial no.
P# Product no.
If the serial number and the 2D code become illegible due to mechanical damage or overpainting,
traceability will no longer be possible.
Explanation of symbols
CSA, Canadian Standard Association®
The instrument was inspected and certified by CSA International. Instruments bearing this
mark comply with the applicable Canadian and US standards on safety.
GOST, Gossudarstwenny Standart (Государственный Стандарт)
GOST-R (mark)
Instruments bearing this mark comply with the applicable Russian national safety regulations
(Russian Federation).
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European directives.
8 WIKA operating instructions pressure transmitter, model S-11
Approvals
Pin assignment
2D code