Output Signals; Voltage Supply - WIKA S-11 Betriebsanleitung

3. Specifications
Vacuum tightness
Yes
GB

3.2 Output signals

Signal type
Current (2-wire)
Current (3-wire)
Voltage (3-wire)
Depending on the signal type the following loads apply:
Signal type
Current (2-wire)
Current (3-wire)
Voltage (3-wire)

3.3 Voltage supply

Power supply
The permissible power supply depends on the corresponding output signal.
Output signal
4 ... 20 mA (2-wire)
0 ... 20 mA (3-wire)
DC 0 ... 10 V
DC 0 ... 5 V
10
Signal
4 ... 20 mA
0 ... 20 mA
DC 0 ... 10 V
DC 0 ... 5 V
Load in Ω
≤ (power supply - 10 V) / 0.02 A
≤ (power supply - 3 V) / 0.02 A
> maximum output signal / 1 mA
Power supply
DC 10 ...30 V
DC 10 ...30 V
DC 14 ... 30 V
DC 10 ...30 V
WIKA operating instructions pressure transmitter, model S-11