Vlmd-1-2-R - ABB AMTD-1 Montageanleitung

Modular digital instruments
1. Settings
EN

VLMD-1-2-R

1
1 Press and hold the button for at least 3 seconds until the display flashes.
2 Press the button repeatedly until the indication of the parameter to set
appears.
3 Press and hold the button for at least 3 seconds to select the required
full scale.
8
2
V
> 3 sec.
Select current to use
Minimum alarm threshold [V]
Maximum alarm threshold [V]
Alarm tripping delay [sec.]
Alarm cutout hysteresis [%]
Alarm output configuration
Reset min and max values
3
V
> 3 sec.
V