Measuring An Object From The Inside; Measuring The Depth Of An Object; Examples Of Use - Powerfix Profi Z22855 Bedienungs- Und Sicherheitshinweise

be measured.
j
Turn the handwheel
Move the external measuring jaws
touch both sides of the object you want to measure. Please
ensure that you do not damage the object you want to
measure by subjecting it to too much pressure.

Measuring an object from the inside:

j
Place the internal measuring jaws
you want to measure.
j
Turn the handwheel
internal measuring jaws
on both its inner sides. Please ensure that you do not dam-
age the object you want to measure by subjecting it to too
much pressure.

Measuring the depth of an object:

j
Move the depth-measuring blade
j
Put the depth-measuring blade
the surface (e.g. inside a hole).
j
Slide the body of the calliper downward until you feel
resistance.
j
Ensure that you do not damage the depth-measuring blade
pressure on them.
j
The LCD display
j
After carrying out the measurement, move the external
measuring jaws
again by turning the handwheel
j
Switch the LCD display
ON / OFF key
Tip: The LCD display
after approx. 3 minutes.
j
Tighten the locking screw
until you feel some resistance.

Examples of use

Q
Tip: When measuring, always proceed as described in the
chapter on using the calliper.
Comparison of plug and socket (see fig. C):
j
First measure the dimensions of the plug.
j
You may wish to make a note of the measurement.
j
Then measure the socket.
Deviation from a reference value (see fig. D):
j
Measure a reference object (in this case A).
j
Leave the measuring jaws
and press the key to obtain the zero setting (ZERO)
j
Then measure the second object.
The LCD display
ment of the second object to that of the reference object (A).
033_PL-HU-CZ-SK_Content.indd 9
or the object you want to measure by exerting too much
6
11
10
inwards clockwise.
7
outwards anti-clockwise. Move the
7
apart until they touch the object
2
6
now displays the dimensions.
5
/ internal measuring jaws
off again by pressing the
5
.
automatically switches itself off
5
again by turning it clockwise
4
/
2 11
now shows the deviation of the measure-
5
together until they
11
against the object
2
out of the calliper.
6
in position until it touches
together
2
inwards clockwise.
7
in this position
.
9
GB 9
20/09/2012 10:23:35