Technical Specifications - Velleman CAMCOLC1 Bedienungsanleitung

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a Velleman product! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer. Damage caused by disregard of
certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any
ensuing defects or problems. Note that damage caused by user modifications to the device is not covered by the
warranty.
2. Installation
• Choose an appropriate mounting spot at the rear window of your car. We recommend installing the camera in
the upper right corner of the rear window.
• Before fixing the camera, pre-fit the camera onto the installation spot. Bend the mounting bracket according to
the shape of the installation spot if necessary.
• Fix the camera onto the installation spot using the included screws and bolts or using the adhesive.
• Now, connect the camera as pictured:
1. camera (rotate to align)
2. connection between camera and cable
3. power cable (4m) with + (red) and – (black) connections (connect to the reversing light)
4. video cable (8m)
5. RCA connection to the monitor (monitor not incl.)

3. Technical Specifications

Power Supply
Pick-Up Element
Resolution
Min. Illumination
Viewing Angle
Cable Length
Total Weight
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
CAMCOLC1
CAMCOLC1 – COLOUR BACK-UP CAMERA
12VDC / 40mA
colour CMOS sensor
250 000 pixels
1.5 lux
120° / 150°
8m
400g
2 VELLEMAN