Hendi 860083 Gebrauchsanweisung Seite 4

Maintenance advice:
• Always remove the plug from the power point be-
fore cleaning.
• If used intensively, regularly remove lime scale
from the bottom of the water tank
• Never immerse the appliance in water or any
other cleaning fluid
Faults:
Fault
Appliance does not work
Appliance does not reach the set temperature
Technical data
230~240 VAC/50 Hz / 435W
Guarantee
Any defect affecting the functionality of the applian-
ce which becomes apparent within one year of its
purchase will be corrected by free repair or replace-
NL EN
ment provided that it has been used and maintain-
ed in accordance with the instructions and has not
been abused or misused in any way. Your statutory
rights are not affected. If it's under guarantee, state
Discard
At the end of the life of the appliance, please cast of the appliance according to the on that moment ap-
plying regulations and guidelines.
4
• Clean the appliance with a damp cloth
• Never use aggressive or corrosive cleaning
agents
• Avoid as much as possible water contacting the
electrical components
Possible cause
No power at the power point
The plug is not plugged (correctly) into the power point
Heating element faulty
Control unit faulty
Heating element fuse faulty
where and when it was bought, and include proof of
purchase (e.g. till receipt).
In line with our policy of continuous product de-
velopment we reserve the right to change pro-
duct, packaging and documentation specifications
without notice.
Possible solution
Check the fuse
Check the plug
Contact the supplier
Contact the supplier
Contact the supplier