Troubleshooting - Ryobi RBV26B Bedienungsanleitung

Deutsch (Übersetzung der originalen Anleitungen)

TROUBLESHOOTING

Problem Possible Cause
Engine fails to start.
Spark plug shorted or fouled.
Spark
porcelain
ignition lead wire shorted, broken, or
disconnected from spark plug.)
Ignition inoperative.
Engine hard to start. Water in petrol or stale fuel mixture.
Engine under or over choked.
Weak spark at spark plug.
Engine lacks power.
Engine overheats.
English (Original instructions)
plug broken (cracked
or electrodes broken;
19 19
Solution
Fill the tank.
Replace the spark plug.
Check and make sure the switches engaged are ready
to work:
and vacuuming opening sides, and insert the sliders
into the switch slots right way.
service centre.
spark plug hole aims at the ground.
fuel from the engine.
away from the engine before restarting.
to "FULL" position and repeat the normal starting
procedure.
procedure with a new spark plug.
Contact an authorized service centre.
Filter" section earlier in this manual.
Mix the fuel according to the "Mixing the Fuel" section
earlier in this manual.