MARIMEX PLUS Montageanleitung Seite 37

PICTURE NO. 15:
1. As per pic. A, place the small part of the plastic holder (F) onto all the protective
net legs (C).
2. As per pic. B+C, connect the larger part of the plastic ring holder (F) with the ring
and put on the lower part, which is already fixed from the previous step (picture A).
3. Continue in the same way for the other net legs (picture D).
No. 15
6. In the last step, we will pass the tightening rope (J) through the eyes and tri-
angles, one after another. Please take care that the rope passes through all 30
triangles and all 15 of the net eyes. At the end, tie a knot on the rope so nothing
comes off. (picture No. 16).
No. 16
Návod trampolina.indd 37
A
C
B
D
37
3. 8. 2017 16:34:50