Setting-Up Operation; Using The Radio-Controlled Socket; Using The Remote- Control; Trouble-Shooting - Silvercrest 91210 Bedienungs- Und Sicherheitshinweise

©

Setting-up operation

©
Using the radio-controlled
socket (fig. B)
1. Put the radio-controlled socket into
any shuttered socket and connect
the appliance you want to operate.
2. Switch the electrical appliance on.
The radio-controlled socket can
only perform its switching function
when the device to be controlled is
switched on.
ATTENTION! FIRE HAZARD!
Do not attach any appliances which
could cause fires or other damaged
if left unattended when switched
on. The maximum load of every
radio-controlled socket is approx.
6
3. 00 W. Any overload could cause
a risk of fire or damage to the device.
3. Press the manual ON / OFF button
to switch the remote-controlled
5
socket on directly on the appliance.
The LED operating status display
will shine. Alternatively, you can also
switch the remote-controlled socket
on using the remote control (See
"Using the remote control").
4. Press the manual ON / OFF button
to switch the remote-controlled
5
socket off directly on the appliance.
The LED operating status display
will go out. Alternatively, you can
also switch the remote-controlled
socket off using the remote control
(See "Using the remote control").
©
Using the remote-
control (fig. A)
1. Use the button ON / OFF
the channel whose device you would
like to switch on or off. The remote
control controls up to 4 radio-con-
trolled sockets (individually, in groups,
or all at the same time).
2. Use the ALL-ON / OFF button
switch all radio-controlled sockets on
or off at the same time.
©

Trouble-shooting

If the remote control does not
work, please check the follow-
ing points:
Prob- The operating indica-
lem tor
control device illumi-
nates but there is no
6
reaction
Rem- · Check that the batteries
edy
6
Setting-up operation
2
on the remote
1
still have enough power.
If applicable put in new
batteries.
GB
for
to
3
9