Setting-Up Operation; Using The Radiocontrolled Socket; Using The Remote-Control - Silvercrest IAN 284705 Bedienungs- Und Sicherheitshinweise

Q
Q
1. Put the radio-controlled socket
2. Switch the electrical appliance
284705_silv_Funksteckdosen-Set_IP44_Content_ES.indd 51
button 3 on the remote con-
trol within the 30 second time-
frame. All previously stored
codes will be deleted immedi-
ately after pushing the Master
OFF button 3 and the process
will complete.
Prevent interference:
Ensure the various sockets are
spaced approx. 50 cm apart.

Setting-up operation

Using the radiocon-
trolled socket (fig. B)
into any shuttered socket and
connect the appliance you
want to operate.
on. The radio-controlled socket
Setting up / Setting-up operation
can only perform its switching
function when the device to be
controlled is switched on.
ATTENTION! FIRE HAZ-
ARD! Do not attach any appli-
ances which could cause fires or
other damaged if left unattend-
ed when switched on. The maxi-
mum load of every radio-con-
trolled socket is approx. 3,680 W.
Any overload could cause a risk
of fire or damage to the device.
Using the remote-
Q
control (fig. A)
1. Use the button ON / OFF
for the channel whose device
you would like to switch on or off.
The remote control controls up
to 4 radio-controlled sockets
(individually, in groups, or all at
2
GB/MT 51
21.06.17 15:39