Setting-Up Operation; Using The Radiocontrolled Socket - Silvercrest 322055 Bedienungs- Und Sicherheitshinweise

remote control during the
30 second timeframe.
You will then again have
30 seconds to delete more or
store a new code.
Deleting all codes:
To delete all codes, first repeat
step 1 – 2.
Then push the MASTER-OFF
button 3 on the remote con-
trol within the 30 second time-
frame. All previously stored
codes will be deleted immedi-
ately after pushing the Master
OFF button 3 and the process
will complete.
Prevent interference:
Ensure the various sockets are
spaced approx. 50 cm apart.
34 GB

Setting-up operation

Q
Using the radiocon-
Q
trolled socket (fig. B)
1. Put the radio-controlled socket
into any shuttered socket and
connect the appliance you
want to operate.
2. Switch the electrical appliance
on. The radio-controlled socket
can only perform its switching
function when the device to be
controlled is switched on.
ATTENTION! FIRE HAZARD!
Do not attach any appliances
which could cause fires or other
damaged if left unattended
when switched on. The maxi-
mum load of every radio-con-
trolled socket is approx.
3,680 W. Any overload could