Connection - led2work SYSTEMLED-Serie Kurzanleitung

SYSTEMLED

5 | Connection

On the luminaire is an input for power supply via Wieland GST 18/3 connection jack.
About this jack and with suitable connection material the luminaire is connected with a
230V AC electric power supply system.
For the connection to the power supply system the luminaire must
be switched off and electrically load-free. A direct connection of a
switched-on luminaire can destroy the LEDs!
Through-wiring (cascading):
With the through-wiring you can electric-chain several SYSTEMLED luminares. The
first luminare get the 230V AC power supply connection and the following luminaires
are linked with Wieland GST18 cables via outputs and inputs. The whole amperage of
all chained luminaires may not exeed over the fuse rating of the power supply system.
Optional there are following connection accessories for this luminaire:
Wieland cable GST18, connection female - Schuko plug, length 5m
Wieland cable GST18, connection female - Schuko plug, length 3m
Wieland cable GST18, connection female - free end, length 5m
Wieland extension cable GST18, length 1m
Wieland extension cable GST18, length 2m
Wieland extension cable GST18, length 5m
A
input for power supply
B connection DIMMmodul
C
switch ON/OFF
D output for through-wiring
E
T-nut profil
Item no.
240100-01
240100-02
240200-01
240300-01
240300-02
240300-03
| 13