Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SYSTEMLED
1 | Proper use
The luminaire is used for illumination. The luminaire is intended for mounting in a lumi-
naire holder or mounting bracket.
For connection values see "Technical data". The supply cable is connected to the lumi-
naire via an M12 plug connection.
The safety information and all other information in this manual must
be followed. Read the entire operating manual carefully before
mounting and turning on.
Keep the operating manual with the device. It must be stored and
handed over to third parties when the product is passed on.
2 | For safe operation
The operating parameters of the LED luminaire specified on the type plate must cor-
respond to the supply parameters of the machine or of the transformer.
Under no circumstances may the luminaire be covered with cloths,
foils or similar. Object distance from the luminaire should be at
least 10 cm.
Machines or devices can emit voltage spikes due to various fac-
tors. These voltage spikes in the power supply via machines
or devices should be avoided!
Operate the luminaire only in a mounted status. Do not connect a switched-on lumi-
naire to 230V AC power. Hot plugging can destroy the LEDs.
| 11
Werbung
Kapitel
Inhaltsverzeichnis
