Siemens SITRANS LR250 Kompaktbetriebsanleitung Seite 30

6.2.4 Programming via the handheld programmer
Note
While the device is in PROGRAM mode the output remains active and continues to respond to changes in the device.
•
The device automatically returns to Measurement mode after a period of inactivity in PROGRAM mode (between 15
•
seconds and 2 minutes, depending on the menu level).
Parameter menus
Note
For the complete list of parameters with instructions, see the full operating instructions.
Parameters are identified by name and organized into function groups.
1. Enter PROGRAM mode
● Point the programmer at the display from a maximum distance of 300 mm (1 ft).
● RIGHT arrow activates PROGRAM mode and opens menu level 1.
● Mode opens the menu level last displayed in PROGRAM mode within the last 10 minutes, or menu level 1 if power has
been cycled since then.
①
Handheld programmer
28
1. QUICK START
2. SETUP
2.1. IDENTIFICATION
2.2. DEVICE
............
2.4. LINEARIZATION
2.4.1. VOLUME
② ③
Display
2.4.1.1. VESSEL SHAPE
Maximum distance: 300 mm ( 1 ft)
SITRANS LR250 (FOUNDATION FIELDBUS)
A5E33472700-AA, 08/2014