Crivit 1-LD4597 Bedienungs- Und Sicherheitshinweise Seite 8

In the middle row of the display the heart rate is shown while wearing the chest belt.
If the signal is received from the chest belt the heart symbol will flash. To the right of
the heart rate the heart rate in percent of the maximum heart rate is shown. The
maximum heart rate is calculated by evaluating your age, weight and height.
Warning light
Timer
TIMER TIMER
The bottom row of the display will show the elapsed training time. The middle row
will show your heart rate and the heart rate in percent of the maximum heart rate.
The timer will start automatically when the chest belt starts measuring the heart rate.
The timer will continue counting the time if the feature mode of the watch is changed.
Press SET to select the timer mode:
TIMER total training time
training time in heart rate target zone
training time with heart rate over target zone
▲
training time with heart rate below target zone
▼
Press and hold SET to reset the training time.
If your heart rate reaches or exceeds 99% of
your maximum heart rate, or your heart rate
exceeds the target zone values (see target
zone) the red warning light will blink and an
alarm will sound.
COMPTE TEMPORIZADOR
- 13 -
Memory feature
MEMORY SPEICHER
The stored values are shown in the bottom row of the display.
maximum heart rate during training
HI H
minimum heart rate during training
LO N
average heart rate during training
AV D
Press SET to show the stored values in succession.
Press and hold SET to reset the stored values.
Target heart rate
ATTENTION: Consult your physician before selecting a
target zone. The target zone presets are approximate
guidelines and are not suitable for everyone.
ZONE BEREICH
The bottom row of the display will show the lower and upper limit value of the target
zone.
The selected training type is shown on the top row of the display.
MEMOIRE MEMORIA
FO AL
FA BA
MO PR
ZONE ZONA
- 14 -