Memory Feature; Heart Rate Measurement; Timer; Target Heart Rate - Crivit 1-LD4597 Bedienungs- Und Sicherheitshinweise

If the chime is activated, the bell symbol will appear and the watch will chime at the
beginning of every hour.
Exit setting mode by pressing MODE. The alarm can be activated or deactivated by
pressing SET. If the alarm is activated the alarm symbol
When the alarm sounds, press SET, SEL or MODE to stop the alarm.
Snooze feature
If no button is pressed when the alarm sounds, the alarm will shut off after about 30
seconds and the symbol will blink on the display. The alarm will stop and will
resume after sounding after about 90 seconds. The process will repeat itself 4 times.
Timer (max. 23:59:00)

TIMER

TIMER
Press and hold SET for 3 seconds to enter setting mode.
The minutes of the timer time will blink on the display.
Press SEL to set minutes of the timer time and confirm your setting by pressing SET.
Set the hours in the same way.
Now the additional settings for the timer will follow. Press SEL to select the desired
mode:
Cd r After reaching 0:00 the timer will count the set time again
Cd U After reaching 0:00 the timer will count forward
Cd S After reaching 0:00 the timer will stop
Exit setting mode by pressing MODE.
The timer can be started or stopped by pressing SET.
Press and hold SET to reset the timer.
After the timer time is up an alarm will sound.
Stop watch
Press MODE to select the feature before proceeding.
CHRONO CHRONO ST- - - - UHR ST UHR
CHRONO CHRONO ST ST UHR UHR
Press SET to start or stop the stop watch. Press SEL while the stop watch is running to
record a lap time. Up to 99 laps can be recorded.
Press and hold SET to reset the stop watch.
will appear.
COMPTE TIMER
CHRONO CHRONO CRONO CRONO
CHRONO CHRONO CRONO CRONO
- 11 -

Memory feature

DATA ANSICHT
RECALL DATEN
Press SEL while the stop watch is stopped to display the fastest lap on the display.
Press SET to display the other lap times.
Please note: The memory feature can only be used if at least one lap time was
recorded.

Heart rate measurement

Press MODE to select the feature before proceeding.
HRM HRM HRM HRM PULS PULS PULS PULS
The subfeatures of the heart rate measurement can only be used when the chest belt
is connected.
Press SEL to access the subfeatures of the heart rate watch.
Timer
TIMER TIMER
Memory feature
MEMORY SPEICHER

Target heart rate

ZONE BEREICH

Calories, fat burn and BMI

CALORIE KALORIEN
Fitness
FITNESS FITNESS
LEVEL LEVEL
APPEL RECUP
DONNEES DATOS
FC FC FC FC PULSO PULSO PULSO PULSO
COMPTE TEMPORIZADOR
MEMOIRE MEMORIA
ZONE ZONA
CALORIES CALORIAS
NIV FORM NIVEL
PHYSIQ FIT
- 12 -