digades dguard Bedienungsanleitung Seite 19

OPERATING THE dguard
EN
After an emergency call has been triggered: GPS coordinates and
voice message are transmitted
If the language of your current region is available in the functional scope
of the dguard
erwise, English is used
The emergency coordination centre can use the information transmitted
automatically to organise the help you need.
Step 2a: Automatic emergency call and manual emergency call
without a Bluetooth headset
As soon as the connection is established to the emergency coordination
centre, your current position is played three times to the emergency coor-
dination centre as a voice message.
18
SYSTEM
®
INSTRUCTION
An emergency call that has been triggered can be can-
celled within 15 seconds by pressing the emergency call
button at least twice.
INFO
If you have stored information on personal contacts under
"Emergency call configuration", your personal contacts are
not informed about the accident situation when an emer-
gency call is made manually, as it cannot be determined
whether the emergency call is about you or a third party.
system, the message is played in the local language; oth-
®
(Chapter "1.1 List of regions supported",
INFO
Voice messages in the case of automatically and manually
triggered emergency calls without a connected Bluetooth
headset have the following content:
"Attention! A motorbike equipped with an automatic
emergency call system has been involved in an accident.
Get ready to record the GPS coordinates of the accident
site. The GPS coordinates are: <GPS coordinate 1>
<GPS coordinate 2>.
The announcement of the coordinates is repeated three
times. A connection is then made to the accident victim
if he/she has connected a Bluetooth headset."
p. 5).