Operating The Dguard; Switching On The Dguard; System Status And Troubleshooting; Checking The System Status On The Dguard - Digades Dguard Bedienungsanleitung

OPERATING THE dguard

4 Operating the dguard

4.1 Switching on the dguard

Observe the following requirement:
• Your dguard
1. Switch on your motorbike's ignition.
Ö The LED on the dguard
EN
on. As soon as the LED on the dguard
the system is active.

4.2 System status and troubleshooting

4.2.1

Checking the system status on the dguard

The green LED on the dguard
flashes twice quickly with
a 1-second pause be-
lights up continuously The dguard
in quick succession
14
®
dealer has activated the dguard
®
®
tween each flash
flashes slowly The dguard
is off Fault. Check the system status
flashes quickly The dguard
flashes slowly at
irregular intervals
flashes 4 times
SYSTEM
system
®
system
®
button flashes and the system is switched
button lights up permanently,
®
button shows you the current system status.
®
The dguard system logs into the mo-
®
bile network after the ignition has been
switched on.
system is searching for the
®
GPS position.
system is activated and ready
®
for use.
in the dguard app.
®
system is currently making an
®
emergency call.
Bluetooth connection mode active.
Bluetooth connection established success-
fully.
system.
®
button
®