digades dguard Bedienungsanleitung Seite 13

ACTIVATION
5. Enter the mobile number of the dguard
6. Enter the 8-digit serial number of the dguard
find the serial number in the form SN-XXXXXXXX on the label of the
dguard
7. Enter the 6-digit verification key.
8. Enter your motorbike s 17-digit vehicle identification number (VIN).
9. Select a vehicle class and a fuel type. Select a vehicle class and a fuel type.
10. Click on
Ö You have reconnected your dguard
EN
3.3 Connecting a Bluetooth headset to
the guar
1. Switch on your motorbike's ignition.
Ö The LED on the dguard
When the LED on the dguard
tem is active.
2. Put on your headset.
3. Start the connection process by following the user manual of your
headset.
4. To start the dguard
dguard
Ö The LED on the dguard
system automatically tries to establish a connection to your Bluetooth
headset.
Ö If you hear a confirmation tone and the LED on the dguard
flashes 4 times, the connection process was successful. he LED then
remains lit up.
12
module.
®
to create the motorbike.
s ste
®
INFO
We recommend that you use a headset.
If your Bluetooth headset is not connected, you cannot
speak to the emergency coordination centre in the event
of an emergency call. Naturally, the emergency call with
your GPS coordinates can be made without a Bluetooth
headset.
button flashes slowly and the system is started.
®
system's Bluetooth connection mode, press the
®
button 4 times in quick succession.
®
®
module.
®
system to the dguard
®
button lights up permanently, the sys-
®
button flashes at irregular intervals and the
module. You will also
®
app.
®
button
®