Bosch CRR 320 Betriebsanleitungen Seite 44

en 44 | CRR 320 | Online data
24. Online data
i
The purpose of the Online data function is to provide
"live" monitoring of the curve profile of a tightening
operation.
1. Connect the wrench to the PC.
2. Click onto the Online data button.
3. Perform the screwing operation.
Fig. 19: Online data
1) Tightening angle
2) Synchronize Reset with wrench
3) Save XML
4) Export Excel
5) End
6) Tightening force calculated
7) Load parameter
8) Reset
9) Hold Peak
10) Tightening force
The function of the control elements in the field marked
corresponds to those in Section 23.10.
Tightening angle
Indicates the instantaneous or peak torque value.
Synchronize Reset with wrench
If this option is activated, the graph is reset on pressing
the acknowledgement key on the wrench.
In this case the values J calculated by the wrench are
not displayed.
|
0 986 629 502 2015-02-16
Save XML
Saves the curve data in an XML file.
Export Excel
Exports the curve data to Excel.
End
Terminates Online data mode. The window is closed.
Tightening force calculated
The measured values calculated by the wrench are dis-
played as soon as tightening has been confirmed on the
wrench or Auto Reset has been triggered in line with
the Auto Reset time. This display does not appear in the
case of Reset synchronized with the wrench.
i
Attention: The values do not necessarily coincide
exactly with the values of the displays (Fig.19,
Pos. 10) and (Fig.19, Pos. 1).
Load parameter
Loads the limit values that have just been set on the
spanner and adjusts the diagram accordingly. (Alterna-
tive: ALT + L). For a workflow, the limit values should be
reloaded each time the screw parameters are changed.
Reset
Resets the display. A new tightening operation can be
performed. (Alternative: ALT + Space key)
Hold Peak
If the F tick is set, the instantaneous torque value dis-
play settles at the peak value. Otherwise the values are
displayed in Track mode.
Tightening force
Indicates the instantaneous or peak torque value.
Robert Bosch GmbH