Installing On A Network; Axis Media Control (Amc) - Axis 231D Installationsanleitung

Installing the AXIS 231D/232D
8

Installing on a Network

The AXIS 231D/232D is designed for installation on an Ethernet network. This involves
assigning an IP address to the dome camera, either manually or via an automated network
service (DHCP). Select one of the following procedures depending on your network:
Notes:
• The AXIS 231D/232D has a default IP address - 192.168.0.90
• DHCP is enabled by default
• The AXIS 231D/232D supports Universal Plug and Play (UPnP) in Windows Me and XP. UPnP is enabled by
default. Note that UPnP must be installed on your workstation. To do this, open the Control Panel from the
Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the
Networking Services section. Click Details and then select UPnP as the service to add. Refer to the Windows
help files for more information.

AXIS Media Control (AMC)

AXIS Media Control (AMC) - an ActiveX component required for Microsoft Internet
Explorer, installed automatically on first use.
AMC must be installed for viewing live images in Microsoft Internet Explorer. If your
working environment restricts additional software components, you can configure your
AXIS 213 to use a Java applet for updating the images. See the online help files under Live
View Config | Layout | Default Viewer for Internet Explorer. Or use another supported
Web browser.