T.O.M GSS13V Originalbetriebsanleitung Seite 13

SAFETY INSTRUCTIONS SPECIFIC TO SCROLL SAWS
1.This scroll saw is designed to be used indoors and in a dry environment.
2.Do not cut workpieces less than 75 mm wide, so as to be able to hold them by hand outside of the blade guard.
3.Avoid placing your hands in positions where a wrong movement may lead them to enter the path of the blade.
4.Always use the blade guard in order to avoid a risk of injury should the blade break.
6.Do not place, assemble or adjust workpieces on the saw table while the saw is running.
7.Never start up the scroll saw without having cleared all objects (tools, trimmings, etc.) from the table, with the exception of the workpiece,
guides or other supports required for operation.
Never connect the machine to the mains before it is completely assembled.
Noise can be harmful to your health. Make sure that you wear ear protection when the noise level surpasses 85 dB(A).
ASSEMBLY
Blade guard knob
Motor and table
700606-Manual-C.indd 13
Do not touch the upper rocker arm
IMPORTANT!
Blade guard support Blade assembly knobs
Switch / button 4 screws Blower Arme
Blade guard
13
31/08/15 11:28:25