Frying Foods - Silvercrest SKF 2800 B3 Bedienungsanleitung

Frying foods

1) Switch on the deep fat fryer using the on/off switch q . The control lamp
integrated in the on/off switch q lights up .
2) Turn the temperature controller
oil or the fat is now heated up to the required temperature . When the re-
quired temperature has been reached, the green control lamp 0 lights up .
NOTE
The correct frying temperature is to be found either on the food packaging or
in the frying times table in these operating instructions . A rough guide as to
which foods should be fried at what temperature is given by the pictures on
the front of the deep fat fryer:
The values given are only for guidance . The temperature can vary depending
on the properties of the foods and personal taste!
3) Pull the handle upwards until it audibly engages .
4) Open the appliance lid r by pressing the lid release button 6 .
5) Lift the frying basket 3 out of the deep fat fryer . Add the food to be fried .
Do not fill the frying basket 3 to more than the max . fill level marked on
the inside of the frying basket 3 . However, always takeNOTE of the frying
quantity indicated on the packaging of the food to be deep-fried!
6) Carefully replace the frying basket 3 in the deep fat fryer .
7) Close the appliance lid r . It must click into place audibly .
SKF 2800 B3
8 to the desired temperature . The cooking
Symbol Food
Prawns
Chicken
Chips (fresh)
Fish
Temperature
130°C
150°C
170°C
190°C
GB │ IE │ NI │ CY │ 11 ■