Connect Your Feeder - Sure Microchip Pet Feeder Connect Bedienungsanleitung

Connect your Feeder

In order to complete the setup of your connected system, you need to connect your
Feeder to your Household.
1
Place your Feeder in its intended
location. This is to ensure it can
communicate with the Hub.
4
Press the settings button (
on the Feeder once. The ear
LED will illuminate green.
Adding a Feeder to your current Household
You can add a Microchip Pet Feeder Connect to your existing Sure Petcare
Household via the app. Go to the Household section and follow the
instructions above.
You can also assign your pet's microchip ID remotely via the app. This
means you won't have to add them manually. However, adding pets using
treats can encourage them to use the new product. See page 15 for more
information on adding pets.
2
On the Sure Petcare app,
select 'Add product'.
5
Once the Feeder is connected
)
the LED will turn off and the
Hub will stop flashing.
3
Your Hub will go into
connecting mode and its
ears will flash green.
5
30cm
If you wish to connect more
Feeders, you can do this easily
from within the app.
EN
12