Batteries - Sure Microchip Pet Feeder Connect Bedienungsanleitung

Batteries

Always use 4 x good quality 1.5V alkaline C cell batteries. This will ensure the best
performance of your Microchip Pet Feeder Connect. This product is NOT designed
for use with rechargeable batteries. To insert or change the batteries please follow
the steps below:
There is a light near the rear of the Feeder. If the batteries are low, or if there's a
problem with how they've been inserted, this light will flash red every 5 seconds.
1
Turn the Feeder upside down to
access the battery compartments.
3
+
-
Insert the batteries. Ensure the +/-
symbols on the batteries match the
symbols on the Feeder itself.
Once you program your pet's microchip ID into the Feeder it will be permanently
stored in its memory. This means that even when you change the batteries, the
Feeder will still recognise your authorised pet.
11
2
Remove the battery covers.
4
+
-
Replace the battery covers.