Open Source Software Contained In Vitoconnect - Viessmann VITOCONNECT 100 Bedienungsanleitung

Open Source Software Contained in Vitoconnect 100

1 Overview
This product contains third party software, including open source software. You are entitled to
use this third party software in compliance with the respective license conditions as provided in
this document.
The following third party software is contained in this product:
Component
binutils
busybox
dnsmasq
iw
json-c
libcurl
libmicrohttpd
libnl
libusb
openssl
Linux Kernel
regdb
U-Boot
uclibc
wpa_supplicant
zlib
2 Updates of This Document
You can ind the latest version of this document on your Vitoconnect 100 by following these steps:
Press the side button on the Vitoconnect 100 for 5 seconds until the lower LED starts lashing
yellow in order to start the Vitoconnect in Access Point Mode. Then connect to the wii
"VITOCONNECT-<xxxx>" with your smartphone. You ind the password for the wii on the bar
code at "WPA2 login". Now please open a browser and access http://vitoconnect.gateway or
enter http://192.168.1.1 into the browser edit line. Then follow the link "Open Source Licenses".
The latest version of this document is furthermore available at http://viessmann.com/vitoconnect/
licenses
5785733_2016-10.indd 4
License
GPLv2
GPLv2
GPLv2
IW License
JSON-C License
Curl License
LGPLv2.1
LGPLv2.1
LGPLv2.1
OpenSSL License
GPLv2
Wireless regdb License
GPLv2
LGPL
BSD 3-clause License
ZLIB License
25.10.2016 15:05:20