Busch-Jaeger 6186/33 Produkthandbuch Seite 191

®
Busch-Installationsbus KNX
Third party software components, notices
and OSS license texts
** Selecting the default archive device
The default archive device is now 'stdin' on read and 'stdout' on write.
The installer can still override this by presetting 'DEFAULT_ARCHIVE'
in the environment before configuring (the behavior of '-[0-7]' or
'-[0-7]lmh' options in 'tar' are then derived automatically). Similarly,
'DEFAULT_BLOCKING' can be preset to something else than 20.
** Selecting full pathname of the "rmt" binary.
Previous versions of tar always looked for "rmt" binary in the
directory "/etc/rmt". However, the "rmt" program included
in the distribution was installed under "$prefix/libexec/rmt".
To fix this discrepancy, tar now looks for "$prefix/libexec/rmt".
If you do not want this behavior, specify full path name of
"rmt" binary using DEFAULT_RMT_DIR variable, e.g.:
./configure DEFAULT_RMT_DIR=/etc
If you already have a copy of "rmt" installed and wish to use it
instead of the version supplied with the distribution, use --with-rmt
option:
./configure --with-rmt=/etc/rmt
This will also disable building the included version of rmt.
6186/33 | 2CDC502082D0101 189