Busch-Jaeger 6186/33 Produkthandbuch Seite 115

®
Busch-Installationsbus KNX
Third party software components, notices
and OSS license texts
Installing libffi
=================
First you must configure the distribution for your particular
system. Go to the directory you wish to build libffi in and run the
"configure" program found in the root directory of the libffi source
distribution.
You may want to tell configure where to install the libffi library and
header files. To do that, use the --prefix configure switch. Libffi
will install under /usr/local by default.
If you want to enable extra run-time debugging checks use the the
--enable-debug configure switch. This is useful when your program dies
mysteriously while using libffi.
Another useful configure switch is --enable-purify-safety. Using this
will add some extra code which will suppress certain warnings when you
are using Purify with libffi. Only use this switch when using
Purify, as it will slow down the library.
It's also possible to build libffi on Windows platforms with
Microsoft's Visual C++ compiler. In this case, use the msvcc.sh
wrapper script during configuration like so:
path/to/configure CC=path/to/msvcc.sh LD=link CPP=\"cl -nologo -EP\"
6186/33 | 2CDC502082D0101 113