Husqvarna HMI:FS5000 D Bedienungsanweisung Seite 10

Symbol Text message
"Warning. Water in fuel level high. Empty water in fuel filter/water sepa-
rator. Driving with water in fuel warning will limit the RPM to 1200 after 5
minutes."
"Warning. Water in fuel level high. Engine speed is limited to 1200 rpm
due to high water level in fuel. Empty water in fuel filter/water separator.
Drain all water from fuel filter may take several minutes."
"Regeneration required due to high soot load. Recommended fuel level
before starting regeneration is at least 50%. Regeneration takes ap-
proximately 30 minutes."
Soot load: XXX%
"Engine power has been reduced due to high soot load. Regeneration
must be performed to prevent engine from locking. Recommended fuel
level before starting regeneration is at least 50%. Regeneration takes
approximately 30 minutes."
Soot load: XXX%
Power reduction: XX%
"Engine speed and power has been reduced due to high soot load. Re-
generation must be performed to prevent engine from locking. Recom-
mended fuel level before starting regeneration is at least 50%. Regen-
eration takes approximately 30 minutes.
Soot load: XXX %
Power reduction: XX%
Engine speed limit: 1500 rpm
"Engine speed and power has been reduced due to high soot load. Re-
generation must be performed with Service Tool (SERDIA). Recom-
mended fuel level before starting regeneration is at least 50%. Regen-
eration takes approximately 30 minutes."
Soot load: XXX %
Power reduction: XX%
Engine speed limit: XX rpm
"Engine speed and power has been reduced due to high soot load. DPF
filter need to be replaced."
Soot load: XXX %
Power reduction: XX%
Engine speed limit: XX rpm
10
Related products
Only applicable for
FS7000 D, FS7000 DL and
FS7000 DMT.
Only applicable for
FS7000 D, FS7000 DL and
FS7000 DMT that comply
with the Euro V Emission
standard.
1247 - 001 - 09.07.2019