Anhang; Menü-Übersicht - Husqvarna HMI:FS5000 D Bedienungsanweisung

Menü-Übersicht
Language
Metric
Button to enter Setup
Start
Note: This is for products with a clutch.
To avoid carbon monoxide poisoning
the machine must be placed in a well
ventilated area.
Make sure that the following conditions
are met:
Engine Running
Speed CTRL in Stop position
Engine Temerature > 60C
Blade not running
Clutch disengaged
Start
Note: This is for products without a clutch
Pay special attention to the Safety
Requirements or dismount the blade.
To avoid carbon monoxide poisoning
the machine must be placed in a well
ventilated area.
Ensure that the following
conditions are met:
Engine Running
Speed CTRL in Neutral
Engine Temerature > 60C
36
Setup Menu 1
Backlight
Press
Celsius
Regeneration
Menu 2
Continue
Continue

Anhang

Auto
Start
Start
English
Danish
German
Spanish
Finnish
French
Dutch
Norwegian
Caution for hot exhaust!
Never leave this machine unattended
while the engine is running.
Press START to activate
Regeneration
Caution for hot exhaust!
Never leave this machine unattended
while the engine is running.
Engine RPM may vary during the
process.
Progress: 50%
Estimated remaining time: 0:30
1247 - 001 - 09.07.2019
Select
Continue
Continue