Zwilling 36470-000 Bedienungsanleitung Seite 32

Operating the hand blender
Fig. 9: Cleaning the drive unit
32
1. Clean the blender attachment with detergent
and hot water.
NOTE:
If food residues have stuck to the blades,
remove such residues with a brush. Do not use
any sharp-edged objects.
2. If necessary, only wipe the drive unit with a
soft, slightly moistened cloth (Fig. 9). In this
regard, ensure that no moisture enters the
housing during cleaning.
NOTE:
Some foods may discolour plastic parts. Rub
off any discoloration with a cloth moistened
with vegetable oil.
3. Dry the drive unit and blender attachment
and make sure that you have removed all
residues as the blender attachment will be in
contact with food.
4. Store the hand blender in a dry and cool
place.