If You Find A Fault - Zwilling 36470-000 Bedienungsanleitung

For your safety
Disconnect the appliance from the mains before carrying
ƒ
out any work such as cleaning or maintenance, or if it is not
being supervised or if it is not in use.
Clean the appliance after every use. Do not touch the blades.
ƒ
There is a risk of injury! Use a soft brush if necessary.
Never completely immerse the blender attachment in water
ƒ
or other liquids. This is to prevent water from penetrating
the upper part. In the event that water has penetrated the
blender attachment, let the attachment dry thoroughly and
only use it again if it is completely dry.
Only clean the drive unit and power cable with a soft,
ƒ
slightly moistened cloth. In this regard, ensure that no mois-
ture enters the housing during cleaning.
Do not use any hard cleaning utensils, such as steel wool, or
ƒ
any sharp or corrosive cleaning agents to clean the appliance.
Store the appliance in a dry and cool place that children
ƒ
and pets are not able to access.
1.6 If you find a fault
A faulty appliance can cause damage and injuries:
Never operate a faulty appliance or a faulty blender attach-
ƒ
ment.
Check the hand blender for damage before each use. If you
ƒ
notice any damage, contact customer service (see 5.2 "Cus-
tomer service") or a similarly qualified person immediately.
CAUTION!
In order to avoid a hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off
by the utility.
26