Image Adjustment; Menu Setting - Chal-Tec 10009322 Anschluss- Und Anwendungshinweise

When use the projector for the first time. It normally will appear with image faintness and the image is
trapezoid. This is caused by wrong lens focus or trapezoid correction. Please follow the below steps to
correct:
Focus adjustment
Turn the lens into the projector, then turn it out slowly, at the same time looking at the resolution point care
when the image is very clearly (take the middle area of the image), it is the best situation of the lens.
Keystone correction
If a projected picture has keystone distortion correct image with Keystone adjustment. The image becomes
trapezoid shape when the screen or project is not level. Please reposition the projector to improve its angle
to the screen. However, the circumference of the image may not be focused.
1. Menu setting method
1. Using the projector, press "menu". The
picture display on screen to adjust Menu
(picture I).
2. Press "/" key. the menu in turn circle
into "picture" > "sound" > "time" >
"system"
3. Select the adjust interface, use "/" key
to choose the wanted item (picture II).
4. Press "OK" or "/" to adjust the item
parameter.
5. Finished the elected item parameter, press
the "menu" key again, exit the page.
6. Repeat operating step 2. ~ 5. Till you
finished all the parameters, press "exit" exit
the menu page, otherwise. The menu page
will auto exit after a period time.

Image adjustment

Menu setting

Picture I
Picture II