Panel Instruction; Open Operation - Chal-Tec 10009322 Anschluss- Und Anwendungshinweise

1. Indicator light
Red: Standby mode
Green: Working mode
2. Power key
This button can lead the projector to
working/standby mode.
3. Direction key
Adjust with parameters, the same function
with the remote control
If the projector is the new one, please read "projector install" chapter, placed the projector, connect the
power wire and the signal wire, he operation as follow:

Open operation

1. Before use the remote. Put in two size 7 batteries. 

2. Open the power switch on the backboard, the power light
turn red. 

3. Press the power key on the remote control or panel, the
indicator light turn green.

4. After 2 second, the projector lamp begin work, image
projected on screen the machine is working smoothly.

5. For the new projector. When the first time to use, maybe will appear image unclear or trapezoid
distortion, please read „image adjustment" chapter.

6. After the image is clear, then you can watch program. During watching, you also can setup the
system parameter, please read „menu setting" chapter.
Close operation
1. During use, the projector, press „power" key can let the projector switch to standby mode.

2. When the projector switch into standby mode, the light will turn green from red.

Panel instruction

4.
5. Menu
6. S-key
Open/close
key
Confirm
Open or close the Menu
Source key (VGA, HDMI, etc.)