Safety Precautions - Chal-Tec 10009322 Anschluss- Und Anwendungshinweise

Warning:
To avoid electrical shock, please do not place the projector under moist conditions.
Warning:
When turning of the projector, the fans will continue to run for 90 seconds. Before unplugging the power
cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote Control battery:
Please insert the batteries correctly. Keep the remote control out of children or pets.
1. Cleaning instructions
When cleaning this projector,make sure the power cable is unplugged.use a soft cloth to clean.Do
not use harsh cleansers
2. Accessories
To avoid any damages to the projector,use accessories enclosed in the package.
3. Environment conditions
Do not place the projector in wet or moist conditions.
4. Installation
Please place this projector on a stable and leveled areas.
5. Ventilation
For best result, proper ventillation is requiered. Keep filter cleaned or it will cause the projector to
overheat. Rinse the filter monthly.
6. Power
Match power Source (220V or 110V)
7. Ground Cable
It ls a 3 pin plug.
8. Power cable
Inspect the power cable before plugging into the power source.
9. Lightning
When not in use for long periods of time or while storms, please unplug the cable.
10. Repair
Due to high voltage.do not attempt to repair the projector yourself. Please call a professional
technician.
11. Heat sensitive device:
De not use near other heating devices. It can damage the performance of the projector.
Warning:
Do not stare directly into the light of the lens.
It is very bright lamp. It can cause damage to your eyes

Safety Precautions

Tips