Microphone Mute; Pause Key; Caller Identification; List Of Calls - Topcom TWIN OG-T700 Gebrauchsanweisung

TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
3.9

Microphone mute

It is possible to mute the microphone during a conversation.
Press during the conversation, the microphone is then deactivated, you can talk freely
without being heard by the calling party.
"MUTE" is displayed. Press

3.10 Pause Key

When dialling a number you can add a pause between two digits by pressing the redail/pause
key for 2s.

3.11 Caller Identification

Caller identification is only available if you have subscribed to this service with your
telephone operator. When you receive an external call, the callers number will appear on the
display as the telephone rings.
If the network sends it, or if the name of the caller is in the address book, the caller is identified
by his or her name.
The caller identity is replaced by the call duration after 15 seconds in communication. It is still
possible to display the caller's identity after this time by pressing OK-key repeatedly for the
name and number.

3.11.1 List of calls

Your telephone keeps a list in memory of the last 40 calls received. This function is only
available if your are subscribed to the caller ID information. The correspondents that have
called are identified by their telephone number or name in the same way as in caller
identification.
The presence of new / unanswered calls is indicated by the flashing
To consult the list of calls:
1. Press . If there are no calls in the list 'EMPTY' will appear.
2. Scroll through the calls using the up
shown if the name is send by the network or is stored in the phonebook. When
shown, this call is been aswered. When
at the end of the list you will hear a beep tone.
3. If you press OK, the telephone number will be shown. Note: if the telephone number is
longer then 12 digits, press OK again to see the complete number.
4. Press OK again to see the time and date when the call is received
5. Pressing OK again will give you the option to add this entry in the phonebook if it's not
already stored:
– Press OK when 'ADD' is shown on the display. Enter or modify the name and
press OK. Enter or modify the telephonenumber and press OK. Select the
melody (1-5) which will be heard when this number is calling by means of the up/
down keys and press OK. The entry will be stored in the phonebook.
6. To call back a correspondent, simply press the key
name are displayed.
If a caller is in the phonebook, they are identified by their name in the list of calls.
14
again to return to normal mode.
or down
is shown, the call is unaswered. If you are
arrows. The callers names will be
when their telephone number or
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
-icon on the display.
is