Service Menu 01, Code Number; Service Menu 02, Version; Service Menu 03, Sauna Types; Service Menu 05, Session Time - Villeroy & Boch Comfort Control Montage-/Serviceanleitung

Comfort Control
9. System parameters
9.1. Service menu 01, code
number
Call up:
Condition: The control system is switched off.
1. Press the button (1)
the same time, and keep pressed.
2. Connect at the master switch (3) before
doing so.
3. Now release the button (1)
(2) .
Display:
The "service" symbol
Entry value:
To activate the Service menu, use the up/down keys
Press the button to confirm each number.
If the entry is correct, Service menu 02 will appear in the Service menu display.
You can now use the buttons
Press the button
9.2.

Service menu 02, version

Display value:
The session-time display briefly shows the current software version number.
9.3.

Service menu 03, sauna types

Entry value:
The following types of sauna are available.
Use the up/down keys
0 Sauna
3 Infrared/Infraclima
Press the button to confirm the selection.
9.4.

Service menu 05, session time

Entry value:
The following preset session-time settings (in hours) are available.
Use the up/down keys
01
Press the button to confirm the selection.
50701118/10.05
and light (2) at
and light
l is displayed together with the Service menu 01.
to display the selected Service menu.
to select the value.
Sauna type
1 Sauna/Comfort Climate
4 Sauna/Comfort Climate/Infrared/Infraclima
to select the value.
Sauna session time
04
3
to enter the four-figure code 7452.
to select further Service menus.
06 12
2 1
2 Infrared
5 Sauna/Infrared
18
PAGE 47