Cleaning Program; Scale Removal Program; General Maintenance - Krups Espresso Automatic EA83 series Handbuch

7.2 Machine cleaning program – total duration: about 13 minutes
Press the key to start the automatic cleaning program when the "Cleaning needed" message is
displayed.
Just follow the instructions shown on the screen.
The automatic cleaning program is in two parts – the cleaning cycle itself, then 1 rinsing cycles. Press
to perform cleaning at any time and then choose MAINTENANCE => OK => CLEANING from the menus
displayed.
!
Note: If your machine is unplugged when cleaning or if there is a power cut, the cleaning programme
will restart at the step in progress when the incident occurred. You will not be able to postpone
this operation. This is essential due to water system rinsing reasons. In this case, a new cleaning
tablet may be required. Be sure to complete the entire cleaning cycle to avoid any risk of irritation
(seek medical advice if cleaning solutions are accidently swallowed). The cleaning cycle is a
continuous cycle and the pump can be heard intermittently. Do not put your hands under the
coffee outlets during the cycle.
7.3 Automatic scale removal program – total duration: about 22 minutes
!
Caution! If your product is equipped with our Claris - Aqua Filter System cartridge F088 -
Please remove this cartridge during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance will
automatically warn you with a message when you need to proceed with scale removal.
n To perform the scale removal program, you will need a container with minimum capacity of 0.6
litres and a KRUPS (40 g) descaling sachet.
Press the key MAINTENANCE => OK => DESCALING to start the automatic cleaning program when
the "Scale removal needed" message is displayed.
Just follow the instructions shown on the screen, making sure the sachet dissolves fully.
The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing cycles.
If a power cut occurs during the cycle or if you unplug your machine, the cycle will re-start at the step in
progress when the incident occurred, without the option of postponing this operation
!
Caution! Be sure to complete the entire scale removal cycle to avoid any risk of intoxication.

7.4 General maintenance

Always remove the power supply cord from the socket and let your appliance cool down before cleaning
it.
Do not use utensils or cleaning products likely to scratch or corrode the appliance.
Wipe the body with a damp non-abrasive cloth. Wipe the display screen carefully with a soft and dry cloth.
For optimal hygiene, clean it regularly to prevent condensation from forming and falling into the cup.
Clean the coffee grounds, the drip tray and cover with hot water and washing up liquid Fig. 30, 31, 32.
Accessories must be dried before replacing.
For easy cleaning, remove the drip tray as described above Fig. 31 et 32.
Rinse the water tank with tap water Fig. 6.
!
Caution! Cleaning tray, Drip tray and its grid, Coffee grounds collector and its front part and the water
tank are not designed to go into the dishwasher.
30