Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance Instructions; Compressor Oil; Oil And Oil Filter Replacement - Hertz HGS 3-20 Bedienungshandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5.4 MAINTENANCE INSTRUCTIONS

COMPRESSOR FLUID
o In our compressors Shell Corena S type of oil is being used. (in some countries its called Corena D or
Comptella ÖL) This oil is specially produced oil by taking into account of compressor operation type as
you will se below.
o If you are unable to find Shell Corena S oil in your region, you may use an equivalent oil shown in the
below list. These oils are not completely equivalent to Corena S series. For this reason, if you are
having difficulty, you may need to replace the oil filter and separator together with the compressor oil.
Our experiences indicate that, when the oil residue in the separator and oil filters element are mixed
with oil of different property; this may rapidly impair the filters.
MOBİL
BP
CASTROL AIRCOL PD 32
TEXACO
o As the chemical structures and contributions of different types of oils are different; mixing them with
each other or using them in the compressor may cause a severe damage with a high cost.
o Do not put any oil additive in the compressor oil as in the motor oils. As the oil that you use has been
prepared specially for the compressor; it already includes this type of additives.
o In case of using motor oil, hydraulic oil etc; these two types will get mixed and become paste
consistency and this immediately impairs all the filters of your compressor. If you keep operating this
way, there may be stationary damages in your screw unit in a few days.
o For this reason do not keep other lubricating oils beside your compressor. Because, your maintenance
operator may accidentally use it.
o In addition if you are in need of long life synthetic oil; contact our service and sales departments.
• Physical Properties
Shell Corena S Oil
ISO Viscosity Degree
Kinematic Viscosity@ 40 °C cSt.
Viscosity İndex
Density @ 15 °C kg/l
Flowing point °C
Flaring point °C

OIL AND OIL FILTER REPLACEMENT

Replace the oil and oil filter at every 2000 hours. If within 6 months 2000 hours is not completed, replace it once
every 6 months. In case of oil change definitely replace the oil filter.
- BELT DRIVEN MODELS
RARUS 424
ENERGOL RC R-32
COMPRESSOR OIL EP VDL-32
OIL FILTER
OIL DISCHARGE VALVE
RARUS 425
RC R-46
PD 46
EP VDL-46
S 46
46
46
104
0.874
-30
207
OIL CHARGING PLUG
37
S 68
68
68
102
0.876
-30
210

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis