Ordering Replacement Parts; Disposal And Recycling; Storage And Transport - Gardol GHR-E 38 Originalbetriebsanleitung

•
The blade on the mower spindle is subject to
more wear and tear than any other compo-
nent of the unit. Check the condition of the
blade on the mowing spindle at regular inter-
vals and make sure that it is tightly fastened.
•
If the blades on the mower spindle become
blunt and need replacing, please contact our
customer service. Use only genuine spare
parts.
7.2.1 Adjusting the counter blade (Fig. 8)
Important! Wear protective gloves.
The counter blade (H) is pre-adjusted at the fac-
tory. After extended use, readjustment may be
necessary.
•
If the counter blade is too loose, you will get a
coarse, uneven cut.
•
If the counter blade is too tight, you hear noi-
se and the mower will be difficult to push.
Adjust the hex screws (G) so that they are set
equally on both sides of the mower, such that the
counter blade (H) and reel (2) barely make audi-
ble contact.
•
Turning the hex screw (G) clockwise -> coun-
ter blade moves closer to the reel
•
Turning the hex screw (G) counter-clockwise
–> counter blade moves further away from the
reel
The counter blade (H) is correctly adjusted if a
piece of paper placed between the blades on the
reel (2) and the counter blade is cut along the en-
tire length if you turn one of the wheels forwards
by hand.

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Anl_GHR_E_38_SPK7.indb 16 Anl_GHR_E_38_SPK7.indb 16
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage and transport

Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the machine in
its original packaging.
Transport
•
Always carry the mower by its handle and ne-
ver reach into the cutting mechanism.
•
Fit the shipping protectors, if any.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine against slipping and tip-
ping over.
- 16 -
19.07.2016 13:08:02 19.07.2016 13:08:02