Function Description; Intended Use - Oase PondoVac Premium Gebrauchsanleitung

- EN -
3.2

Function description

The unit is used for removing sludge from ponds/pools via the suction hose and collecting it in the tank.
Sensors in the tank monitor the water level. The discharge pump switches on automatically when a certain
level is reached. The dirty water is pumped out of the tank via the discharge hose.
Vacuumed up solid dirt particles may damage the paintwork of the cast iron housing of the discharge
pump. The formation of a thin layer of rust on the housing is normal and does not negatively affect the
function of the discharge pump.
Extensive range of practical accessories available.
•
Extremely powerful vacuum with a capacity of up to 333 l/min.
•
The robust chassis with solid rubber wheels and parking brake ensures excellent mobility and stability.
•
3.3

Intended use

Only use the product described in this manual as follows:
For pond sludge removal.
•
For cleaning ponds, swimming ponds and pools.
•
Operate in accordance with instructions. (→ Technical data)
•
For private or commercial use.
•
The following restrictions apply to the unit:
Only operate with water at a water temperature of +4 °C to +35 °C.
•
Never use for substances other than water.
•
Do not use as a dry vacuum cleaner.
•
Never run the unit without water.
•
Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
•
22