Oase Lunaqua 10 LED Gebrauchsanleitung Seite 8

- GB -
Insert the new bulb. Note that the recess at the outside of the retaining ring is inserted via the housing web. Check the
O-ring and replace, if damaged. Reassemble the unit in the reverse order, connect to the power supply and perform a
function check.
Pos: 46 /Lampen/Wasserspieltechnik/Lunaqua 35/Reinigung Lunqua 35 @ 4\mod_1154519461544_121.doc @ 22379 @
Cleaning
Adhere to the safety instructions! Carry out the work steps as specified under 'Replacing the bulbs'. Only use water
and a soft brush. Ensure that no moisture can enter the unit.
Pos: 47 /Alle Produkte/Entsorgung - gem. Bestimmungen/Fachhändler @ 0\mod_1125578523312_121.doc @ 1407 @
Disposal
Dispose of the unit in accordance with the national legal regulations.
Pos: 48 /Lampen/Wasserspieltechnik/Lunaqua 10 LED/Störungen Lunaqua 10 LED @ 10\mod_1242636103935_121.doc @ 62681 @
S
Malfunctions
Malfunction
Lamp does not light up
Light intensity decreases
Water in the spotlight housing
Pos: 49 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1630 @
8
Cause
Power supply interrupted
Bulb defective
Lamp glass soiled
Seal defective
Remedy
Check power supply
Replace bulb
Clean
Check sealing rings and replace, if necessary