Switching On And Off; Setting The Speed - Flex SFE 8-2 115 Originalbetriebsanleitung

 Attach new toothed belt. First feed the
toothed belt over the front, large cog (9.),
then over the rear, small cog (10.).
 Re-attach covers and screws (11.).

Switching on and off

WARNING!
Hold the electric power tool by the insulated
grip surfaces only!
Brief operation without engaged switch
rocker
 Push the switch rocker forwards and hold
in position.
 To switch off the power tool, release
the switch rocker.
18
Continuous operation with engaged
switch rocker
 Push the switch rocker forwards (1.) and
engage by pressing the front end (2.).
 To switch off the power tool, release the
switch rocker by pressing the rear end.

Setting the speed

To set the speed, move the dial to the
required value.
SFE 8-2 115