Product Description - IKEA FRAMTID HIN2K Gebrauchsanweisung

ENGLISH
• Risk of burns! Do not place objects made of
metal, such as knives, forks, spoons and sau-
cepan lids on the cooking surface, as they
can get hot.
Warning! The ventilation gap of 5 mm
between the worktop and front of the unit
underneath it must not be covered. For all
safety distances between hob and cabinets
refer to the Assembly Instruction.
Warning! Users with implanted
pacemakers should keep their upper
body at least 30 cm from induction cooking
zones that are switched on.
Warning! If the surface is cracked, switch
off the appliance to avoid possibility of an
electric shock and call the After Sales Service
(refer to the Service chapter).

Product description

Cooking surface layout
1 Induction cooking zone 1800W
2 Induction cooking zone 1400W
3 Pilot lamp
4 Control knobs
How to avoid damage to the appliance
• The glass ceramic can be damaged by ob-
jects falling onto it, or knocked by the cook-
ware.
• Cookware made of cast iron, cast aluminum
or with damaged bottoms can scratch the
glass ceramic if slid on the surface.
• To avoid damaging cookware and glass ce-
ramics, do not allow saucepans or frying
pans to boil dry.
• Do not use the cooking zones with empty
cookware or without cookware.
• Never line any part of the appliance with
aluminium foil. Never place plastic or any
other material which may melt in or on the
appliance.
Assignment of control knobs
1
2
3
4
Pilot light is activated either of the zones are
switched on, and will remain on until the cook-
ing zones are switched off. Once you turn the
hob on a single acoustic signal informs you the
appliance is running correctly.
Residual heat
Warning! Risk of burns from residual
heat! After you switch the appliance off,
the cooking zones need some time to cool
down.
1
2
2
5
1