Bartscher 270 LN Bedienungsanleitung Seite 38

Refrigerator for bottles 700272 (fig. 8)
1. Remove the plugs (c) from the housing and door side, remove the upper bracket (6)
with the washers and plastic seal under the handle.
2. Remove the refrigerator door.
3. Remove the lower masking strip (1).
4. Unscrew the supporting pin (2) from the lower bracket (7). Screw it with all washers
to the opposite bracket (7), symmetrically to the previous position (fig. 8).
5. Fix the door on the supporting pin (2) of the bracket (7).
6. Rotate the bracket (6) with the supporting pin, placed washers and plastic seal by
180° . Unscrew the supporting pin with the washers a nd screw it on the opposite side
of the bracket. Place the bracket (6) in the refrigerator door and screw them to the
holes on the opposite side of the refrigerator.
7. Mask the bracket and free hole with use of plugs (c).
- 36 -
fig. 8