Hints On Disposal - Klarstein Clearcube Bedienungsanleitung

EN
22
Problem
Ice cube is too weak and
thin.
Ice making cycle is normal
but no ice is made.
No water in the unit,
but the "REFILL WATER"
indicator is not on, unit
can not make ice cube.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of
this product, please contact your local council or your household
waste disposal service.
Possible cause
The ambient is too hot.
Ambient temperature or
water temperature in inner
tank is too high.
Refrigerant liquid leakage.
Pipe in the cooling system
is blocked.
The water is not enough
pure. Maybe you have
used the salt water or
others.
The wall of the lower tank
un-derneath the ice basket
is too dirty.
Suggested solution
Turn off you unit first, then
press "ON/OFF" button
again for more than 5
seconds to turn on the
unit again. It will lengthen
each ice-making cycle
time.
Please run the ice maker
below 32 and pour
colder water into tank.
Verify by a qualified
technician.
Verify by a qualified
technician.
Chang to the normal
potable water. The salt
water is prohibited, it will
damage your unit.
Clean this water tank.