Klarstein Clearcube Bedienungsanleitung Seite 18

EN
18
Using your ice maker
Remove the cover of the water reservoir and pour potable water into water
reservoir.
• Be sure to keep water level below the max. level with FULL. mark
displayed in following picture
• Then move back the cover at once to avoid foreign matter enter.
1
Note: Do not pour the water into the internal water tank located underneath
the ice basket. This tank is not big enough and will effect the ice making
performance.
Plug on the main power supply plug. Then press "ON/OFF" button on the
control panel to begin the ice making cycle.
Note: After you plugging on but not turn on the unit through the "ON/OFF"
2
button, the green power indicator will always be on for 2 seconds, then
flash for 3 seconds. But after you turn on the unit by pressing the "ON/OFF"
button, the green power indicator will keep on lighting.
Water reservoir cover