Hints On Disposal - Klarstein Kristall Handbuch

EN
18
Problem Possible Cause
The Ice made is Water temperature is too
too large and with low.
pieces sticking
Ice of previous cycles left
together.
in the water tray.
The program of No coolant in compressor.
making ice is
Compressor is damaged.
correct, but no ice
come out.
Fan motor is damaged.
All indicators The ice is not access to ice
twinkle board.
simultaneously.
The movable detect device
the ice board is damaged.
The ice is full to The movable detect device
reach the ice the ice board is damaged.
board, but no full
The indicate light is
indicate.
damaged.
Important Notes
• It is normal for the compressor and condenser surface to reach temperatures between
70°C and 90°C during operation and surrounding areas may be very hot.
• Due to fast freezing, ice cubes may appear "Cloudy". This is air trapped in the
water and will not affect quality or taste of ice.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/
EU this symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailled information about recycling of this product, please
contact your local council or your household waste disposal
service.
Suggested Solution
Select small size.
Take out the ice under the
standby state.
Call the service centre.
Unplug the power and plug
again to restart the machine.
Call the service centre.
Call the service centre.