Replacing Of The Illuminant; Replacing Of The Power Cord - GERATEK Uppsala KS9000PA++ Bedienungsanleitung

Remove the contents from the fridge and put them into a cooling box.
1.
Switch off the appliance by turning the thermostat to position 0 / AUS /
2.
OFF and disconnect it from the mains or use a cut-off device.
Place a container in front of the appliance to catch the water.
3.
When the encrusted ice melts put some dry cloths into the freezer-
4.
compartment to hold the water back.
Do not use hot water to accelerate the defrosting operation.
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
9.

6.2 Replacing of the illuminant

WARNUNG! The lamp on this device must only be changed by
a qualified technician!
1. Switch off the appliance and draw the plug
out of the socket. Risk of electrical shock!
2. The illuminant is on the top of the cooling
compartment.
3. Remove the top glass trays.
4. Remove the plastic cover of the illuminant. Remove the illuminant.
5. Install a new illuminant.
6. Install the cover.
According to the EU regulation No. 244/2009, your appliance is classified as
a household appliance in accordance with the eco-design requirements for
non-directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic establishments.

6.3 Replacing of the power cord

DANGER!
authorized professional only.
The power cord must be replaced by a qualified and
68